Sun Microsystems Sun Fire V20z - Manual (Page 77)

Chapter 4 Maintaining the Server 4-25
4.4.11 Memory Modules
The following procedure describes how to remove and replace memory modules.
To remove a memory module:
1. Turn off the system, including any attached peripherals.
2. While pressing the cover latch release button with your right thumb (A), slide the
cover towards the rear of the chassis until it contacts the stop (B).
3. Lift the cover up and remove it.
FIGURE 4-34 Removing the Cover
4. Locate the memory module connector in which you will install or replace a
memory module.
5. Remove a memory module by pressing down on the ejector bars at both ends of
the memory module’s socket.
FIGURE 4-35 Removing a Memory Module
A
B