Sun Microsystems Sun Fire V20z - Manual (Page 72)

4-20 Sun Fire V20z Server User Guide • March 2004
4.4.8 Cooling Fans
The following procedure describes how to replace a cooling fan.
1. Press the power switch, on the Operator Panel, to turn off the power to the server.
2. While pressing the cover latch release button with your right thumb (A), slide the
cover towards the rear of the chassis until it contacts the stop (B).
3. Lift the cover up and remove it.
FIGURE 4-27 Removing the Cover
4. Identify the fan(s) to be replaced.
5. If you are replacing a processor cooling fan, unfasten the single screw securing
the center air baffle and lift the baffle away from the chassis. Otherwise, continue
to Step 6.
FIGURE 4-28 Removing the Center Air Baffle
A
B