1 replacing a hard disk drive in a carrier, Replacing a hard disk drive in a carrier 4–9 – Sun Microsystems Sun Fire V20z User Manual
Page 61
Advertising
Chapter 4
Maintaining the Server
4-9
4.4.3.1
Replacing a Hard Disk Drive in a Carrier
1. Withdraw the carrier from the server as previously described.
2. Unfasten the four screws attached to the carrier and remove the backing plates.
3. Remove the new hard disk drive from its packaging.
4. Place the hard disk drive in the carrier and secure it with the four mounting
screws, as shown in Figure 4-8.
FIGURE 4-8
Installing a Hard Disk Drive in a Carrier
5. Re-insert the drive and carrier in the server as previously described.
Advertising