Sun Microsystems Sun Fire V20z User Manual
Page 71
Advertising
Chapter 4
Maintaining the Server
4-19
5. Disconnect the three power supply cables from the motherboard.
FIGURE 4-25
Disconnecting the Power Supply Cables
6. Unfasten the single screw securing the power supply to the rear of the chassis.
FIGURE 4-26
Removing the Power Supply
7. Slide the power supply toward the front of the chassis, and lift it out of the
chassis.
Installation is the reverse of this procedure.
Note –
Check the routing of all cables for obstructions before reinstalling the cover.
Advertising