Sun Microsystems Sun Fire V20z - Manual (Page 75)

Chapter 4 Maintaining the Server 4-23
4.4.10 CPU Voltage Regulator Modules
The following procedure describes how to remove and replace a CPU voltage
regulator module (VRM).
To remove a CPU VRM:
1. Turn off the system, including any attached peripherals.
2. While pressing the cover latch release button with your right thumb (A), slide the
cover towards the rear of the chassis until it contacts the stop (B).
3. Lift the cover up and remove it.
FIGURE 4-32 Removing the Cover
4. Identify the CPU VRM that needs to be replaced.
5. Remove the CPU VRM by pulling it straight up, out of its socket.
FIGURE 4-33 Removing a CPU VRM
A
B