Sun Microsystems Sun Fire V20z - Manual (Page 68)

4-16 Sun Fire V20z Server User Guide • March 2004
4.4.6 Operator Panel Board and Display
The following procedure describes how to replace the Operator Panel board and
LCD. The Operator Panel board is located beneath the CD-ROM/DVD/Floppy Disk
Drive assembly.
1. Turn off the system, including any attached peripherals.
2. While pressing the cover latch release button with your right thumb (A), slide the
cover towards the rear of the chassis until it contacts the stop (B).
3. Lift the cover up and remove it.
FIGURE 4-20 Removing the Cover
4. Remove the CD-ROM/DVD/Floppy Disk Drive assembly (refer to the appropriate
procedure).
5. Remove the two screws securing the LCD to the front panel.
FIGURE 4-21 Removing the LCD
A
B