Document Outline

• Front
• CONTENTS
• About this Guide
  • Conventions
• 1 Introduction
  • 1.1 Equipment Requirements and Specifications
  • 1.2 Customer Support
• 2 Installation
  • 2.1 Before Installing the SIMM for IPDS
  • 2.2 Printing the Menu Settings
  • 2.3 Installing the SIMM for IPDS
  • 2.4 Removing the SIMM for IPDS
• 3 Using the Operator Panel Setup Options
  • 3.1 SIMM for IPDS Setup Options vs. Printer
  • 3.2 Changing IPDS Settings Using the Operator Panel
    • 3.2.1 The IPDS Setup Menu
    • 3.2.2 Selecting a New Value as a Setting
    • 3.2.3 Selecting a Setting from a List of Values
    • 3.2.4 Changing a Numerical Setting
    • 3.2.5 Activating Saved Option Changes
• 4 Setup Operations Reference
  • 4.1 SIMM for IPDS Options Menu Map
  • 4.2 Overview of the EMULATION Menu Options
  • 4.3 EMULATION Menu Options
    • 4.3.1 IPDS Emulation
    • 4.3.2 Default Codepage
    • 4.3.3 Codepage Version
    • 4.3.4 Default FGID
    • 4.3.5 Default CPI
    • 4.3.6 Page Counter
    • 4.3.7 Printable Area
    • 4.3.8 Resource Memory
    • 4.3.9 Exception Control
    • 4.3.10 Font Control
    • 4.3.11 Font Type
    • 4.3.12 IPDS Resolution
    • 4.3.13 Intervention Required
    • 4.3.14 IPDS Timeout
    • 4.3.15 Trace Functions
    • 4.3.16 IPDS Version
  • 4.4 Overview of the PAPER HANDLING Menu Options
  • 4.5 PAPER HANDLING Menu Options
    • 4.5.1 Duplex Control
    • 4.5.2 IPDS Blank Pages
    • 4.5.3 IPDS Envelope Paper
    • 4.5.4 IPDS Manual Paper
    • 4.5.5 IPDS Multipurpose (MP) Paper
    • 4.5.6 Preprinted Media
    • 4.5.7 Universal Size
    • 4.5.8 Other Env Size
  • 4.6 MAP INPUT TRAYS Menu Options
    • 4.6.1 Tray Mapping
  • 4.7 MAP OUTPUT BINS Menu Options
    • 4.7.1 Bin Mapping
  • 4.8 MARGINS Menu Options
    • 4.8.1 ALL INPUT TRAYS Menu
    • 4.8.2 TRAY 1 ADJUST Menu
    • 4.8.3 TRAY 2 ADJUST Menu
    • 4.8.4 TRAY 3 ADJUST Menu
    • 4.8.5 TRAY 4 ADJUST Menu
    • 4.8.6 TRAY 5 ADJUST Menu
    • 4.8.7 MP FEEDER ADJUST Menu
    • 4.8.8 ENV FEEDER ADJ Menu
    • 4.8.9 MANUAL PAPER ADJ Menu
    • 4.8.10 MANUAL ENV ADJ Menu
• 5 IPDS Job Cancel
  • 5.1 Canceling an IPDS Job
  • 5.2 Aborting a Cancel Request
• 6 Remote Configuration of Printer IPDS Settings
  • 6.1 Settings That Require Operator Intervention
  • 6.2 Option Values Which Can Not Be Changed Remotely
  • 6.3 Remote Configuration Using an IPDS Text Job
    • 6.3.1 AS/400 Recommended Procedure
    • 6.3.2 Mainframe Recommended Procedure
    • 6.3.3 Creating a Text Job to Change IPDS Option Settings
      • 6.3.3.1 Lead-in String
      • 6.3.3.2 Lead-out String
      • 6.3.3.3 Entering Option Name and Value Settings
      • 6.3.3.4 Entering Comments in the Job
      • 6.3.3.5 Syntax summary and hints
      • 6.3.3.6 Examples of legal commands
      • 6.3.3.7 Examples of illegal commands
      • 6.3.3.8 Set Default Options Mode Error Messages
      • 6.3.3.9 Restoring Factory Default Settings Remotely
• 7 Using the SIMM for IPDS with a MarkNet Internal or External Print Server
  • 7.1 IPDS in a LAN Environment
  • 7.2 Configuring a MarkNet Internal Print Server
    • 7.2.1 Selecting the MarkNet Internal Print Server TCP/IP Protocol Settings
    • 7.2.2 Setting the MarkNet Internal Print Server Job Timeout
  • 7.3 Configuring a MarkNet Pro External Print Server
    • 7.3.1 Printing a MarkNet Pro Setup Page
    • 7.3.2 Setting the MarkNet Pro TCP/IP Protocol Settings
    • 7.3.3 Setting the MarkNet Pro Job Timeout
    • 7.3.4 Setting the MarkNet Pro Busy Timeout
  • 7.4 Configuring a MarkNet XLe External Print Server
    • 7.4.1 Printing a MarkNet XLe Setup Page
    • 7.4.2 Setting the MarkNet XLe TCP/IP Protocol Settings
    • 7.4.3 Setting the MarkNet XLe Job Timeout
    • 7.4.4 Setting the MarkNet XLe Busy Timeout
  • 7.5 Printing IPDS from PSF/400 with OS/400 V3R1 or V3R6
  • 7.6 Printing IPDS from PSF/400 with OS/400 V3R2
    • 7.6.1 Example CRTDEVPRT for OS/400 V3R2
    • 7.6.2 Example CRTPSFCFG for OS/400 V3R2
  • 7.7 Printing IPDS from PSF/400 with OS/400 V3R7, V4R1, V4R2, V4R3, or V4R4
    • 7.7.1 Example CRTPSFCFG for OS/400 V3R7, V4R1, V4R2, V4R3, or V4R4
    • 7.7.2 Example CRTDEVPRT for OS/400 V3R7, V4R1, V4R2, V4R3, or V4R4
    • 7.7.3 Example CRTDEVPRT for OS/400 V3R7, V4R1, V4R2, V4R3, or V4R4 (continued)
  • 7.8 Printing IPDS from PSF/MVS
    • 7.8.1 Steps to Create a New Printer
    • 7.8.2 Printer Sharing Parameters
    • 7.8.3 Example PSF STARTUP PROC - JCL and PRINTDEV
  • 7.9 Printing IPDS from PSF/2
  • 7.10 Printer Sharing in the PSF/2 Environment
  • 7.11 Printing IPDS from PSF/AIX
• 8 Using the SIMM for IPDS with the Adapter for SCS
  • 8.1 Using the Coax/Twinax Adapter for SCS
  • 8.2 Using the Coax Interface with IPDS
  • 8.3 IPDS Enabled Setting
  • 8.4 Changing the Coax Timeout Value (For Reference Only)
  • 8.5 Verifying the Coax Interface with the SIMM for IPDS
  • 8.6 Using the Twinax Interface with IPDS
  • 8.7 Dual Addresses with the Twinax Interface
  • 8.8 Twinax Interface Settings
  • 8.9 SCS Device Address Setting
  • 8.10 IPDS Device Address and IPDS Buffer Sizes Settings
  • 8.11 Changing the Twinax Timeout Value (For Reference Only)
  • 8.12 Twinax device description
    • 8.12.1 Example CRTDEVPRT for OS/400 V3R7, V4R1, V4R2, V4R3, or V4R4 (locally attached)
    • 8.12.2 Example CRTDEVPRT for OS/400 V3R7, V4R1, V4R2, V4R3, or V4R4 (locally attached, continued)
• 9 Printer Messages and Problems
• 10 Warranty
• Appendices
  • A. Technical Specifications
    • A.1 Printers Supported
    • A.2 Product Description
    • A.3 IPDS Features List
    • A.4 Compatibility
    • A.5 For Direct Network Attachment
    • A.6 For Direct Twinaxial Attachment
    • A.7 For Direct Coaxial Attachment
  • B. Font and Code Page Information
    • B.1 International Language Definitions
      • B.1.1 Latin 1
      • B.1.2 Latin 2/ROECE
      • B.1.3 Latin 3
      • B.1.4 Latin 4
      • B.1.5 Latin 5
      • B.1.6 Baltic Multilingual (Latin 6)
      • B.1.7 Cyrillic
      • B.1.8 Greek
    • B.2 Font Support Overview
    • B.3 IBM 4028 Compatibility IPDS Resident Font Set Fonts (Latin 1)
      • B.3.1 Special Code Pages Supported by the 4028 Compatibility Font Set
    • B.4 IBM 3812/16 Compatibility Font Set
      • B.4.1 Special Code Pages Supported by the 3812/16 Compatibility Font Set
    • B.5 IBM Core Interchange Resident Scalable Font Set
    • B.6 IPDS Core Font Set Code Page Support
      • B.6.1 Latin 1 Country Extended Code Pages
      • B.6.2 Latin 1 EBCDIC Publishing Code Pages
      • B.6.3 Latin 1 ASCII Code Pages
      • B.6.4 Latin 2, 3, 4, 5 Code Pages
      • B.6.5 Latin EBCDIC DCF Code Pages
      • B.6.6 Cyrillic, Greek and Baltic Language Code Pages
      • B.6.7 Arabic Code Pages
      • B.6.8 Hebrew Code Pages
      • B.6.9 Symbol Code Pages
    • B.7 IBM Coordinated Font Set
    • B.8 Postnet Font Support
    • B.9 Font Substitution
      • B.9.1 4028 / 31xx / 43xx Font substitution
      • B.9.2 3812/16 Font substitution
  • C. Recommended memory
  • D. Related Publications
    • D.1 Lexmark Publications
    • D.2 IBM Publications
    • D.3 Intermate Publications
• Glossary
• Index