Nokia M10 - Manual (Page 101)

Nokia M10 User’s Manual
DRAFT
E Copyright Nokia Telecommunications Oy NTC C33539002SE_A0 5-52
TCP/IP settings
You can use the Nokia command line interface to specify whether
TCP/IP is enabled, identify a default gateway, and to enter TCP/IP
settings for the Nokia M10 Ethernet port and all active ATM/ADSL
channels.
Depending on the ATM channel encapsulation the IP settings are
configured in different nodes (dsl, wan or ip-ppp) of the Config
hierarchy as shown in Figure 5-15.
wan
ip–ppp
dsl
ip
PPP
ip-llc
ip-vcmux
ether-llc
ether-vcmux
PPP with
BNCP on
Figure 5-16 IP setting nodes