Draft, Nokia m10 user’s manual – Nokia M10 User Manual
Page 121
Advertising
![background image](/manuals/190762/121/background.png)
Nokia M10 User’s Manual
DRAFT
E
Copyright Nokia Telecommunications Oy
NTC C33539002SE_A0
5-72
BNCP setting
Command
Enable/disable BNCP
Description
Specifies whether the Bridge Network Control Protocol
(BNCP) option can be used on ATM channels using
ppp-vcmux encapsulation. See
set ip wan
com-
mands above.
Syntax
set bncp option [on|off]
Arguments
The argument enables/disables BNCP option.
Example
m10> set bncp option on
Advertising
This manual is related to the following products: