Nokia M10 - Manual (Page 48)

Nokia M10 User’s Manual
DRAFT
E Copyright Nokia Telecommunications Oy NTC C33539002SE_A0 4-24
M10 default Parameter Subnode Node
DNS Default Do-
main Name <empty>
Primary DNS
Server Ad-
dress 0.0.0.0 (The address
will be retrieved from
through the PPP link)
Secondary
DNS Server
Address 0.0.0.0 (The address
will be retrieved
through the PPP link)
Bridge Option OFF
SNMP List of
communities
(table) Public
SNMP Auth-
entication
Traps None
Trap IP Ad-
dress Empty
Trap Com-
munity Name Public
SysGroup
Contact Info Empty
Table 4-1 Nokia M10 default settings
4.5 Troubleshooting
In case the data transmission does not work you can check the
following things:
Is the ADSL connection to the remote network working?
The front panel DSL indicator should be green if the ADSL link is
functioning. You can also view the ADSL link status by giving the
show dsl command line interface command. In case the ADSL link is
not functioning, check that the cables connecting the unit to the
telephone line/splitter are properly attached and then turn on the M10
again. If the ADSL link still does not work contact your service
provider.