Nokia M10 - Manual (Page 125)

Nokia M10 User’s Manual
DRAFT
E Copyright Nokia Telecommunications Oy NTC C33539002SE_A0 5-76
Command Set IP address of secondary name server
Description Specifies the IP address of the secondary DNS name
server.
Syntax set dns secondary-address [ip_address]
Arguments ip_address is the IP address of your secondary
name server. Enter 0.0.0.0 if your network does not
have a secondary DNS name server.
Example m10> set dns secondary-address 0.0.0.0
Bridging settings
Bridging lets Nokia M10 learn host addresses as a means of
minimizing traffic. When bridging is enabled Nokia M10 maintains a
table of up to 256 MAC addresses. Entries that are not used within 10
minutes are dropped. If the bridging table fills up the oldest table
entries are dropped to make room for new entries.
Command Enable/disable bridging
Description Enables/disables bridging services in the Nokia M10.
You must enable bridging services within the Nokia
M10 before you can enable it for a specific interface.
Syntax set bridge option [on|off]
Arguments The argument enables/disables bridging.
Example m10> set bridge option on
Command Enable bridging for Ethernet interface
Description Enables/disables bridging services for the Nokia M10
Ethernet interfaces.
Syntax set bridge ethernet option [on|off]
Arguments The argument enables/disables bridging for Ethernet
interfaces.
Example m10> set bridge ethernet option on