Nokia M10 - Manual (Page 94)

Management
DRAFT
E Copyright Nokia Telecommunications Oy NTC C33539002SE_A0 5-45
System settings
You can configure system settings to assign a name to your Nokia M10
and to specify what types of messages you want the diagnostic log to
record.
Command Set system name
Description Specifies the name of your Nokia M10. Each Nokia
M10 is assigned a name as a part of its factory initia-
lisation. The default name for Nokia M10 is “M10”.
Once you have assigned a name to your Nokia M10,
you can enter that name in the Open Location text field
of your browser to open a connection to your Nokia
M10.
Syntax set system name [name]
Arguments name is an alphanumeric string of 16 characters.
Example m10> set system name M10
Command Set diagnostic level
Description Specifies the types of log messages you want the M10
to record. All messages with a level number equal to or
greater than the level you specify are recorded.
Syntax set system diagnostic-level {level}
Arguments If you enter the command without the optional level
argument, the Nokia CLI displays the current diagnostic
level setting. The values for the
level argument are:
1 or low Trivial status messages.
2 or medium Messages that can help
monitor the network traffic.
3 or high Status messages that may be
significant but do not
constitute errors.
4 or warning Recoverable error conditions
and useful operator
information.
5 or failure Messages describing error
conditions that may not be
recoverable.
Example m10> set system diagnostic-level 3