Nokia M10 - Manual (Page 149)

How your Nokia M10 works
DRAFT
E Copyright Nokia Telecommunications Oy NTC C33539002SE_A0 6-9
Nokia M10 sends a DHCP broadcast message asking configuration
information from any available DHCP server. If there is an active
DHCP server behind the WAN interface M10 accepts and uses the
network configuration settings the DHCP server provides to configure
the WAN port parameters.
6.9 Domain Name Service (DNS) relay
Nokia M10 can act as a Domain Name Service relay for the LAN
clients. M10 LAN IP address acts as a DNS server address for all hosts
connected to the LAN. M10 recognises its own name and responses to
name queries with its own name. All other name queries Nokia M10
forwards to a primary or secondary Domain Name Server whose
address has been configured to Nokia M10 either dynamically or
statically.