Nokia M10 - Manual (Page 91)

Nokia M10 User’s Manual
DRAFT
E Copyright Nokia Telecommunications Oy NTC C33539002SE_A0 5-42
You would have to enter two or more letters (”ppp”) to move to the
PPP node, since its node name shares the first letter with the
preferences node.
D Jumping down several nodes at once
You can jump down several levels in the Config hierarchy by
entering the complete path to a node.
M10 (top)>> ip ip-ppp
M10 (ip ip-ppp)>>
D Moving up one node
You can move through the Config hierarchy one node at a time by
entering the
up command.
M10 (ip ip-ppp)>> up
M10 (ip)>>
D Jumping to the top node
You can jump to the top level from anywhere in the Config
hierarchy by entering the
top command.
M10 (ip ip-ppp)>> top
M10 (top)>>
D Moving from one subnode to another
You can move from one subnode to another by entering a partial
path that identifies how far back to climb.
M10 (ip ip-ppp)>> ppp module
M10 (ppp module)>>
D Moving from any subnode to any other subnode
You can move from any subnode to any other subnode by entering
a partial path that starts with a top-level Config command.
M10 (ip ip-ppp)>> ip gateway
M10 (ip gateway)>>