Draft, Management – Nokia M10 User Manual
Page 88
Management
DRAFT
E
Copyright Nokia Telecommunications Oy
NTC C33539002SE_A0
5-39
Command
Download configuration file
Description
Downloads a configuration file from a TFTP server.
Syntax
download [server-ipaddress] [filename] {confirm}
Arguments
server-ipaddress
is the IP address of the TFTP
server.
filename
is the name of the configuration file.
If invoked as
download
with no arguments, you will be
prompted for information. If the optional
confirm
key-
word is added, the transfer will proceed without further
questions.
Example
M10> download 1.12.123.123 config1.cfg
***WARNING*** YOU ARE ABOUT TO DOWNLOAD A
CONFIGURATION FILE.
About to download configuration file:
server: 1.12.123.123
file: config1.cfg
Do you wish to proceed? (type ’yes’ to
confirm):yes
Downloading
Downloading file into RAM
File Download was successful
Replace existing configuration with down-
loaded configuration? (type ’yes’ to con-
firm):yes
172.16.0.0 has been added to the
list
Configuration data saved.
M10>
Command
Upload configuration file
Description
Uploads a configration file to a TFTP server.
Syntax
upload [server-ipaddress] [filename] {confirm}
Arguments
server-ipaddress
is the IP address of the TFTP
server.
filename
is the name of the configuration file.
If invoked as
upload
with no arguments, you will be
prompted for information. If the optional
confirm
key-
word is added, the transfer will proceed without further
questions.
Example
M10> upload 1.12.123.123 config2.cfg con-
firm