Nokia M10 - Manual (Page 80)

Management
DRAFT
E Copyright Nokia Telecommunications Oy NTC C33539002SE_A0 5-31
Command Rewind log
Description Rewinds the diagnostic log display to the top of the ex-
isting M10 diagnostic log. The
reset log command
does not clear the diagnostic log. The next show log
command will display information from the beginning of
the log file.
Syntax reset log
Arguments None.
Example M10> reset log
Command Reset PPP connection
Description Resets and restarts the PPP connection of the speci-
fied ATM logical channel. When you issue the
reset
ppp command the Nokia M10 closes the PPP session
on the specified ATM channel and restarts the connec-
tion.
Syntax reset ppp [vccx]
Arguments vccx indicates the ATM channel, x = 1 – 8.
Example M10> reset ppp vcc1
Command Reset packet statistics
Description Resets packet statistics to zero.
Syntax reset xdsl
Arguments None
Example M10> reset xdsl
Command Restart M10
Description Restarts M10. You must enter the the complete restart
command to initiate a restart.
Syntax restart {seconds}
Arguments If you include the optional seconds arguments your
Nokia M10 will restart when the specified number of
seconds has elapsed.
Example M10> restart 5