Nokia M10 - Manual (Page 134)

Management
DRAFT
E Copyright Nokia Telecommunications Oy NTC C33539002SE_A0 5-85
Command Set PAP password associated with PPP peer
Description Specifies the password associated with a PPP peer.
Syntax set ppp peer-database peer-name [host_name] pap-
password [password]
Arguments The password argument consists of 1 - 32 alphanum-
eric characters. The information you enter must match
the password that will be received from the remote PPP
peer when being authenticated.
Example m10> set ppp peer-database peer-name host
pap-password mypassword
SNMP settings
The Simple Network Management Protocol (SNMP) lets a network
administrator monitor problems on a network by retrieving settings on
remote network devices. The network administrator typically runs an
SNMP management station program on a local host to obtain
information from an SNMP agent such as the Nokia M10.
Command Add community
Description Adds the specified name to the list of communities as-
sociated with the Nokia M10. You can associate 2
communities with the Nokia M10.
Syntax set snmp community [name]
Arguments By default, the Nokia M10 is associated with the public
community.
Example set snmp community public
Command Enable/disable SNMP trapping
Description Enables or disables SNMP trapping. If SNMP trapping
is enabled, your Nokia M10 sends authentication traps
to all SNMP trap destinations. You must enable trap
authentication before you set up your trap destinations.
Syntax set snmp traps authentication-traps [on|off]
Arguments The argument enables/disables trapping.
Example set snmp traps authentication-traps on