Nokia M10 - Manual (Page 73)

Nokia M10 User’s Manual
DRAFT
E Copyright Nokia Telecommunications Oy NTC C33539002SE_A0 5-24
Ending a CLI session
You end a command line interface session by typing quit in the Root
mode. Entering quit in the Config mode switches the session into the
Root mode.
Using the CLI help facility
The help command lets you display on-line help for Root and Config
commands. To display a list of the commands available to you from
your current location in the command line interface hierarchy, type
help . To display help related to a particular command type the
command followed by a question mark, e.g. show ? .
Saving settings
The save command saves the working copy of the settings to restart
values. You can save the changes you have entered for a specific
function or for all functions in the Nokia M10. The Nokia M10
automatically validates its settings when you save and displays a
warning message if the configuration is not correct.
5.2.2 The Root command hierarchy
You begin in Root mode when you start a CLI session. The Root mode
lets you monitor the performance of your M10, display and reset M10
statistics, and issue administrative commands to restart M10
functions.
Root prompt
When you are in Root mode, the CLI prompt is the name of the M10
followed by a right angle bracket (>). For example, if you open a
command line interface to the M10 named “Kilo” you would see
Kilo>
as your CLI prompt.
Root command shortcuts
You can truncate most commands in the command line interface to
their shortest unique string. For example, you can use the truncated
command
q in place of the full quit command to exit the command
line interface. However, you would need to enter rese for the reset
command, since the first characters of reset are common to the
restart
command.