1 for erpcd on the load server host, as superuser, 2 for the remote annex 6300, hold down the button, Another remote annex 6300 – Nortel Networks 6300 User Manual

Page 104: 1 use the cli telnet command to access the unit an, 2 communicate with the unit on the ethernet using, 3 verify the unit’s configuration using na

Advertising
1 for erpcd on the load server host, as superuser, 2 for the remote annex 6300, hold down the button, Another remote annex 6300 | 1 use the cli telnet command to access the unit an, 2 communicate with the unit on the ethernet using, 3 verify the unit’s configuration using na | Nortel Networks 6300 User Manual | Page 104 / 138 1 for erpcd on the load server host, as superuser, 2 for the remote annex 6300, hold down the button, Another remote annex 6300 | 1 use the cli telnet command to access the unit an, 2 communicate with the unit on the ethernet using, 3 verify the unit’s configuration using na | Nortel Networks 6300 User Manual | Page 104 / 138
Advertising
See also other documents in the category Nortel Networks Phones: