Nortel Networks 6300 - Manual (Page 79)

3-21 Remote Annex 6300 Hardware Installation Guide
Chapter 3 ROM Monitor Commands
lat_key
The lat_key command allows you to set the LAT key from the ROM
monitor.
The lat_key is optional and may be purchased separately.
The command syntax is:
lat_key [–d]
The lat_key command display looks like this:
The lat_key –d command displays the current LAT key setting:
monitor:: lat_key
Enter LAT KEY [<uninitialized>]::
monitor:: lat_key –d
Enter LAT KEY [<uninitialized>]::