Nortel Networks 6300 - Manual (Page 43)

2-7 Remote Annex 6300 Hardware Installation Guide
Chapter 2 Installing the Remote Annex 6300
Figure 2-5. Remote Annex 6300 Ethernet Connections
The following subsections contain a description of how to connect
your Remote Annex 6300 to:
❑ Thin Ethernet (10Base2)
❑ Thick Ethernet (10Base5)
❑ Twisted Pair (10BaseT)
Connecting Thin Ethernet (10Base2) Cable
To connect Thin Ethernet (10Base2) or equivalent cable, you must use
a T-connector. The T-connector is installed in your Ethernet network
cable. Follow these steps to connect the Remote Annex 6300 to a Thin
Ethernet cable (see
Figure 2-6 ):
CONSOLE 10BASE5 10BASET
ISDN PRI
LINK
10BASE2
115
Thick Ethernet
(10Base5)
Twisted-Pair
Ethernet (10BaseT)
Thin Ethernet
(10Base2)