Disassembly instructions, 1 unplug the unit, 2 disconnect all the cables – Nortel Networks 6300 User Manual
Page 126: 3 remove the screws from the side and back of the, 4 slide the cover back and lift the cover vertical, Figure d-1 . removing the remote annex 6300 cover
Advertising
Remote Annex 6300 Hardware Installation Guide
Appendix D
Modem Upgrade Instructions
D-2
Disassembly Instructions
These instructions assume that you are facing the unit’s rear panel.
To disassemble the Remote Annex 6300 (see
):
1
Unplug the unit.
2
Disconnect all the cables.
3
Remove the screws from the side and back of the unit.
4
Slide the cover back and lift the cover vertically (see
).
Figure D-1. Removing the Remote Annex 6300 Cover
Screws
(17 places)
Advertising