Option_key, Option_key -25 – Nortel Networks 6300 User Manual
Page 83
Advertising
3-25
Remote Annex 6300 Hardware Installation Guide
Chapter 3
ROM Monitor Commands
option_key
The option_key command loads an option key from the ROM
monitor. The command syntax is:
option_key
[–d]
The option_key command display looks like this:
The option_key –d command displays the current settings:
monitor:: option_key
Enter option_key [<uninitialized>]::
monitor:: option_key –d
option_key: <uninitialized>
Advertising