Nortel Networks 6300 - Manual (Page 38)

Remote Annex 6300 Hardware Installation Guide
Chapter 2 Installing the Remote Annex 6300
2-2
Connecting the Remote Annex to a LAN requires the following
equipment:
❑ The appropriate network cable (e.g., Ethernet transceiver
cable) for connecting to a LAN or an Ethernet loopback
connector.
❑ The console port cable (supplied with software) and a
console terminal.
Installing the Remote Annex 6300 in a Rack (Optional)
Installing the Remote Annex 6300 in a rack is optional and requires
the following equipment:
❑ Mounting brackets, front and back
❑ Hardware kit
❑ Phillips screwdriver
The following paragraphs contain a description of how to mount the
Remote Annex 6300 in a rack. The device can be mounted in two ways:
❑ Front Mount
❑ Rear Mount
Front Mount
The Remote Annex 6300 is mounted to the front of the rack by
attaching the front mounting bracket to the device and then attaching
the device and mounting bracket to the rack.