Assembly instructions, 1 lower the remote annex 6300’s cover onto the uni, 2 secure the cover by installing the 17 screws bac – Nortel Networks 6300 User Manual
Page 121: Figure c-3 . replacing the remote annex 6300 cover
Advertising
C-5
Remote Annex 6300 Hardware Installation Guide
Appendix C
Modem Carrier Card Upgrade Instructions
Assembly Instructions
To reassemble the Remote Annex 6300:
1
Lower the Remote Annex 6300’s cover onto the unit and slide it
forward (see
).
2
Secure the cover by installing the 17 screws back into the cover,
starting at the rear and working to the sides.
Do not over-tighten these screws.
Figure C-3. Replacing the Remote Annex 6300 Cover
Screws
(17 places)
Advertising