Attaching the mounting bracket to the remote annex, 1 remove the mounting brackets and hardware kit fr, 2 remove two screws from the rear of the cover on – Nortel Networks 6300 User Manual

Page 41: 3 install rear mounting brackets to the device usi, 4 tighten the screws to secure the bracket to the, Figure 2-3 . attaching the mounting bracket to the

Advertising
Attaching the mounting bracket to the remote annex, 1 remove the mounting brackets and hardware kit fr, 2 remove two screws from the rear of the cover on | 3 install rear mounting brackets to the device usi, 4 tighten the screws to secure the bracket to the, Figure 2-3 . attaching the mounting bracket to the | Nortel Networks 6300 User Manual | Page 41 / 138 Attaching the mounting bracket to the remote annex, 1 remove the mounting brackets and hardware kit fr, 2 remove two screws from the rear of the cover on | 3 install rear mounting brackets to the device usi, 4 tighten the screws to secure the bracket to the, Figure 2-3 . attaching the mounting bracket to the | Nortel Networks 6300 User Manual | Page 41 / 138
Advertising
See also other documents in the category Nortel Networks Phones: