RAD Data comm LRS-24 - Manual (Page 130)

Appendix D CM-2 Management Commands LRS-24 Installation and Operation Manual
D-28 Defining Auto-Configuration
4. Press <Enter> to continue.
The third Edit screen appears for you to select operations for the file (see
Figure D-28).
EDIT AUTO-CONFIGURATION
Execute configuration: [NO/YES]
Save configuration to HUB: [NO/YES]
Send configuration via: [N/A/TFTP/XMODEM]
User String(Up to 22 characters): [UserString]
To select an option press ‘f’ for forward or ‘b’ for backward.
Figure D-28. Edit Auto-Configuration for New File – Second Screen
5. Select YES to execute the configuration.
6. Select YES to save the configuration.
7. To send the files, select the method: TFTP or XMODEM.
8. Enter a User String of up to 22 characters (optional).
➤ To execute the modem configuration file:
1. Select YES to Execute Configuration.
The Select Method for Configuration screen appears (see Figure D-29).
EDIT AUTO CONFIGURATION
Configure according to:
1.
Modem Type
2.
Specific Slot/Modem list
Enter option number - >
Figure D-29. Select Method for Configuration Screen
2. Select the configuration by type of modem or by a specific slot / modem list).
➤ To configure according to modem type:
1. Select Modem Type from Select Method for Configuration screen (see
Figure D-29).
The Auto-Configuration According to Modem Type screen appears (see
Figure D-30). Only those modems of the type you have selected, which are
currently in the Hub, can be chosen.
Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com