RAD Data comm LRS-24 - Manual (Page 40)

Chapter 2 Installation and Setup LRS-24 Installation and Operation Manual
2-12 Installation and Setup
CM-1 Installation Procedure
➤ To install CM-1:
• Insert the CM-1 module into the CL slot, and fasten it with the two screws.
CM-2 Module
This section covers the installation of the CM-2 module in an LRS-24 enclosure.
Front Panel
A typical front panel for the CM-2 module is shown in Figure 2-6. The functions of
the components located on the front panel are listed in Table 2-4.
STAT/ADD
Power Indicator
Management Transmit
Activity Indicator
Management Receive
Activity Indicator
Status/Address
Display
POWER
TD
RD
CONTROL
R
S
2
3
2
CM-2
Figure 2-6. Module CM-2 Front Panel
Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com