D.16 displaying alarms log, Purpose, Format – RAD Data comm LRS-24 User Manual
Page 140: Procedure
Appendix D CM-2 Management Commands
LRS-24 Installation and Operation Manual
D-38
Displaying Alarms Log
D.16
Displaying Alarms Log
Purpose
Displays the contents of the alarm history buffer of the CM-2 module, or of other
selected I/O module. This buffer contains the last 20 alarms and events (for
example, module insertion/removal).
The alarm log is cleared automatically when LRS-24 is turned off.
Format
NODE nn DSP LOG
Procedure
➤
To display the desired log:
• Type: DSP nn DSP LOG <Enter>.
nn stands for the node number of the desired module, in the range of
1 through 12.
The log of the specified module appears.
The contents of the form depend on the module type. Refer to the Installation and
Operation Manual of the corresponding module for detailed information.
A typical alarm display for the hub log, displayed in response to a request
addressed to the CM-2 module (node 13), is shown in Figure D-41.
MODEM LOG FILE
MODEM NAME: ASMI-31CQ(m)
DEFINE PORT NUMBER
: 1
SELECT MODEM
: MODEM 1 LOCAL
CODE
STATE
DESCRIPTION
TIME
DATE
12
OFF
NearEndMngLinkFail
09:01
2000-03-09
08
OFF
NearEndSyncLoss
09:01
2000-03-09
12
ON
NearEndSyncLoss
09:01
2000-03-09
THERE ARE NO MORE PAGES AT THE MOMENT
Figure D-41. Hub Log File Screen
Order from: Cutter Networks
Ph:727-398-5252/Fax:727-397-9610
www.bestdatasource.com