RAD Data comm LRS-24 User Manual
Page 132
Appendix D CM-2 Management Commands
LRS-24 Installation and Operation Manual
D-30
Defining Auto-Configuration
AUTO-CONFIGURATION ACCORDING TO SLOT/MODEM LIST
Execute configuration for SLOT [NUMBER]
MODEM [NUMBER]
--------------------------------------------------------------------
Modem 1 1 2 2 3 3 4 4
Slot all local remote local remote local remote local remote
1
2
3
4
5
6
7
8
9
10
11
12
Press Enter to choose option. Repeated choice will delete it from the list.
To continue press <tab>.
Figure D-31. Auto-Configuration According To Slot/Modem List Screen
The screen appears with blank fields.
Each slot can hold a modem card that contains:
− A single modem
− Two modems
− Four modems.
2. Enter Slot Number by pressing <F> for forward or <B> for backward.
3. <Tab> from Slot to Modem.
4. Enter Modem Number.
5. Press <Enter>.
An X appears in the correct place in the table. To delete it from the list,
select it a second time.
6. Select ALL if you want to configure all the modems in the slot (this includes
local and remote for all modems on the card).
7. To continue, press <Tab>.
Order from: Cutter Networks
Ph:727-398-5252/Fax:727-397-9610
www.bestdatasource.com