Quick Eagle Networks DL3800E - Manual (Page 23)

1-1
1
Quick Install Guide 1
P
URPOSE
This chapter is a quick reference for the setup and configuration of the
DL3800E Inverse Multiplexer (see Figure 1-1). Please note that not all
configuration items will be discussed, because this chapter only serves to
get you up and running.
Figure 1-1 DL3800E Inverse Multiplexer (front panel)
C
ONFIGURATION
Equipment Needed
• Terminal or PC, with DE-9 port, that will emulate an ANSI VT100
• DL3800E E1 Inverse Multiplexer product (various ports)
• The DL3000E comes either with BNC or 120 ohm
• DE-9 cable (plug-socket) 154-00050-01 (Model DL1081) or equivalent.
• DA-15 (plug) to RJ-48 (plug) for E1 connections 155-00011-01 (Model
DL1033) or equivalent.
• HSSI or 155-10082-01 (HSSI) (Model DL1404-10) or equivalent
• M-34 to DB-25 cables (v. 35) or 155-00903-01 (v. 35) (Model DL1300-10,
or equivalent
• DC-37 to DB-25 (RS-449) 155-00902-01 (RS449) (Model DL1302-10) or
equivalent
• X.21+DB-25 (X.21) 155-00907 (DL1314-10) and 155-00907-12 (DL1314-50)
(Model ID1314-10 and -50) or equivalent