Quick Eagle Networks DL3800E - Manual (Page 77)

Terminal Interface 4-37
4
To Restart Node Software, select DELETE ENTIRE UNIT
CONFIGURATION from the SOFTWARE UTILITIES MENU (
Figure 4-17 )
and press Enter. Use the arrow keys to highlight the Desired Action field.
Press the space bar until
RESTART NODE SOFTWARE appears in the field.
Confirm the change. Move the highlight bar to CONFIRM , and press Enter.
Login Configuration
This screen allows you to designate a NAME, PASSWORD and ACCESS
PRIVILEGE LEVEL for up to eight users.
When the unit is shipped, the factory defaults for username and password
are null. Pressing Enter bypasses both of these parameters until the first
name and password are entered.
To access the LOGIN CONFIGURATION MENU, move the highlight bar to
LOGIN CONFIGURATION in the NODE MAIN MENU and press Enter.
Figure 4-18 is an example of the LOGIN CONFIGURATION MENU.
Figure 4-18 LOGIN CONFIGURATION MENU
NOTE: Name and Password are case-sensitive
DIGITAL LINK DL3800E SR 3.00.22 NODE 1: 08/27/00 00:55:51 MJ
SELECTED DEVICE ADDRESS: 1.00.000 NAME:
LOGIN CONFIGURATION Exit Confirm
USER IDENTIFICATION PASSWORD ACCESS TYPE(S)
1) Cole Porter 12CP Full access
2) Arthur Fiedler Arty1 Maintenance
3) Louie Armstrong Satchmo Provisional
4) Billie Holiday LadyDay Full access
5) No access
6) No access
7) No access
8) No access
TERMINAL AUTOMATIC LOGOUT: Off. (Must use Logout to return to login prompt).
TELNET AUTOMATIC LOGOUT: 5 minutes after no keyboard activity.