Quick Eagle Networks DL3800E User Manual
Page 93
Front Panel Interface
5-5
5
This procedure takes the unit out of the Protected Mode (and clears any
password that may have been programmed) and sets all parameters to
their default settings. To allow you to perform this procedure when the
unit is in protected mode, the Protected Mode is ignored in the first sixty
seconds after powering up. When in Protected Mode, the TEST MENU
does not appear in the Main Menu.
P
OWER
U
P
A
ND
R
ESET
During power up initialization, the unit performs self test and displays a
self-test message. Payload service resumes at the completion of Self Test.
When the Self Test message is removed, the default message
DL3800E
Inverse Multiplexer
appears on the display.
T
OP
M
ENU
The TOP MENU loop consists of five items: (1) DL3800E Inverse
Multiplexer designation, (2) Select Remote/Local, (3) MONITOR MENU,
(4) TEST MENU, and (5) CONFIGURATION MENU.
NOTE: The menu system in the DL3800E unit is consistent with other
Quick Eagle Networks products. Therefore, a user familiar with an
existing product can easily operate the DL3800E. An example of a
menu tree is shown below: