Quick Eagle Networks DL3800E - Manual (Page 33)

3-1
3
Installation 3
I
NSTALLATION
1. Unpack and inspect the DL3800E unit for damage that might have
occurred during shipment. If necessary, wipe off the exterior with
a soft cloth. Save all packing slips and papers that come with the
unit. Save the shipping cartons and packing materials until
installation is complete and proper operation is verified.
2. Verify that all items ordered are included in the shipment. The
shipment should consist of the following:
• DL3800E Digital Inverse Multiplexer
• DL3800E User’s Guide (this manual).
• Appropriate data and network interface cables and connectors (if
ordered).
• Power cord
3. Mount the DL3800E unit.
See “Mounting” on page 3-2 .
4. Connect Power Cables and Connections.
See “Power Cables And Connections” on page 3-3
5. Connect network cables to the DL3800E unit.
See “E1 Network Connection” on page 3-5
6. Connect the DTE cable to the DL3800E unit.
See “DTE Cable And Connection” on page 3-5
7. ASCII Terminal and SNMP Connection
See “ASCII Terminal and SNMP Connection” on page 3-6
NOTE: Before beginning the installation process, inspect the DL3800E
unit for damage which may have occurred during shipment. If damage
has occurred, notify Quick Eagle Networks and your package carrier
immediately.