Front panel leds – Quick Eagle Networks DL3800E User Manual
Page 91
Front Panel Interface
5-3
5
Front Panel LEDs
Table 5-1 Front Panel LEDs
Indication
Description
Test
Test In Progress LED
Off
No tests are in progress.
Solid Red
A test condition exists.
Data Port LEDs
TD
Data DTE Activity LED. Represents pulses to DTE.
Green
Pulses are being detected.
Off
No pulses are being detected.
RD
Date DTE Activity LED. Represents pulses from DTE.
Green
Pulses are being detected.
Off
No Pulses are being detected.
RTS/TA
Request to send indicator, from DTE or TA (HSSI)
Yellow
RTS from DTE is active.
Off
RTS has been removed.
CTS/CA
Clear To Send indicator, to DTE or CA (HSSI)
Yellow
CTS to DTE is active.
Off
CTS has been removed, indicating that the DL3800E unit is not
sending valid data.
DTR
Data Terminal Ready Indicator (N/A for HSSI)
Yellow
DTR from DTE is active.
Off
DTR from DTE is inactive.
Test
Indicates the port is in test mode.
NOTE: The Test LED is off only when the port is not allocated
bandwidth. It lights red when there is a HW DTE Loopback or
DTE/NET Loopback in progress. It is connected to the TEST lead
going from the DL3800E unit to the DTE, so both the LED and the
lead carry the same data
Network LEDs (T-1 through T-8)
Red
Network is in Red Alarm.
Green
Network is Active and running.
Flashing Green
The network is ready, but it is not part of the bundle to the DTE.