Quick Eagle Networks DL3800E - Manual (Page 34)

3-2 DL3800E Inverse Multiplexer User’s Guide — July 9, 2001
3
8. Configure Unit
See “Unit Configuration” on page 4-17 (ASCII terminal)
a. Configure COMM PORT
See “Unit Configuration” on page 4-17 (ASCII terminal)
b. Configure NMS (Network Management) Port
See “SNMP Configuration” on page 4-39 (ASCII terminal)
9. Configure Network
See “Network Configuration” on page 4-25 (ASCII terminal)
10. Configure DTE
See “DTE Configuration” on page 4-20 (ASCII terminal)
M
OUNTING
Rack Mounting
The DL3800E unit (Figure 3-1) is shipped with mounting ears for a 19- or
23-inch rack that are mounted for use with a 19-inch rack.
Desk Operation And Stacking
Four stick-on rubber feet are supplied with each DL3800E unit. Remove the
covering and stick them onto the DL3800E unit bottom. You can now stack
units as required on a flat surface in a well-ventilated, secure area.l
Figure 3-1 DL3800E Rear Panel
NOTE: On DC versions of the DL3800E, the AC receptacle will be
covered with a DC face plate.