Quick Eagle Networks DL3800E - Manual (Page 64)

4-24 DL3800E Inverse Multiplexer User’s Guide — July 9, 2001
4
DSR (Data Set Ready) This allows you to Assert, DeAssert, or set to automatic the DSR leads.
To change or set the DSR lead status, use the UP and DOWN ARROW
keys to highlight RLSD, and use the Space Bar to toggle between Assert,
DeAssert, or Automatic until the desired choice appears. Highlight
Confirm, and press the Enter key to confirm the change. (In Automatic
mode, the 3800E places the signal high when the DTE is sending the
associated signal lead DTR.) (Default - Automatic)
CTS (Clear To Send) This allows you to Assert, DeAssert, or set to Automatic the CTS leads.
To change or set the CTS lead status, use the UP and DOWN ARROW
keys to highlight CTS, and use the Space Bar to toggle between Assert,
DeAssert, or Automatic until the desired choice appears. Highlight
Confirm, and press the Enter key to confirm the change. (In Automatic
mode, the 3800E places the signal high when the DTE is sending the
associated signal lead RTS.) (Default-Automatic)
TM (Test Mode) This allows you to Assert, DeAssert, or set to Automatic the TM leads.
To change or set the TM lead status, use the UP and DOWN ARROW keys
to highlight TM, and use the Space Bar to toggle between Assert,
DeAssert, or Automatic until the desired choice appears. Highlight
Confirm, and press Enter to confirm the change. (In Automatic mode, the
3800E places the signal high when the DCE’s signal leads for enabling
tests are placed high by the DTE.) (Default - Automatic)
DTE Loss Detection Sets the criteria by which a DTE Loss Of Signal will be detected.
In X.21 mode RTS refers to the X.21 signal called Control.
To change or set the DTE LOS criteria, use the UP and DOWN ARROW
keys to highlight DTE LOSS DETECTION, and use the Space Bar to toggle
between the choices: RTS, DTR, and None. When the desired choice is
shown, highlight Confirm, and press Enter to confirm the change.(In
x.21 mode, RTS refers to the x.21 signal called Control). (Default - RTS)
The following entries must be added:
Table 4-6 DTE CONFIGURATION MENU Options (Continued)
Parameter Description/Action