Quick Eagle Networks DL3800E - Manual (Page 57)

Terminal Interface 4-17
4
Configuration
The CONFIGURATION MENU item provides access to a series of
submenus to configure various parameters of the unit, DTE, and network.
Highlight Configuration in the INVERSE MULTIPLEXER MAIN MENU
and press Enter to access the CONFIGURATION MENU. See Figure 4-7 .
Figure 4-7 CONFIGURATION MENU
To access any of the configuration submenus, highlight the desired item
and press the Enter key. The following are samples and descriptions of
the submenus that can be accessed from the CONFIGURATION MENU.
Unit Configuration
Highlighting UNIT and pressing the Enter key accesses the UNIT
CONFIGURATION MENU shown in Figure 4-8 . The configurable items
and options are described in Table 4-5 .
The following parameters can be set or changed for the Node: DATE,
TIME, ALARM ENABLE, AUTOMATIC BACKUP, FRONT PANEL,
PERMIT SELECT DEVICE ACCESS FROM REMOTE, UNIT NUMBER,
UNIT NAME and LOCAL TERMINAL BAUD RATE, BITS/PARITY, STOP
BITS, X-ON/X-OFF and MULTIDROP MODE. HARDWARE, SOFTWARE
and MIB REVISIONS are view-only items and cannot be changed.
Major 01/01/90 04:58:17 Unit: 0 NET : 2 (114)
Network 15 Minute UAS Major Threshold Exceeded
Major 01/01/90 04:58:17 Unit: 0 NET : 1 (114)
Network 15 Minute UAS Major Threshold Exceeded
DIGITAL LINK DL3800E SR 2.00.00 NODE 7: 01/01/90 05:55:07 MJ
SELECTED DEVICE ADDRESS: 7.00.000 NAME:
CONFIGURATION MENU Exit
Unit
DTE
Network
Network Thresholds
SAVE configuration