Toshiba Tohsiba Electromagnetic Flowmeter Converter L5232 - Manual (Page 87)

6F8A0917
- 86 -
Changing the display low cut On/Off setting.
The following is an example to show how to change the display low cut setting from 2.OFF to
1:ON.
Switch operation Display example Description
D4: DSP LOW CUT
2:OFF
Select D3: 4 −20 ALM. OUT from the setting item selection
menu.
The currently set alarm output value used when an alarm
occurs appears.
D4: DSP LOW CUT
2:OFF
The cursor appears.
D4: DSP LOW CUT
1:ON
Press to select 1:ON.
D4: DSP LOW CUT
1:ON
The display blinks and the set value is displayed for
confirmation.
Press MENU/ENT again to write the data. Then the cursor
disappears and the display returns to the condition that the set
value is displayed.
D4: DSP LOW CUT
Returns to the menu of setting item selection.