Technics SX-PR54/M - Manual (Page 102)

Part VI Sound
102
QQTG0701
Sou
n
d
Part Setting
Set the various sound attributes for each part.
Selecting an attribute
1. On the SOUND MENU display, select PART
SETTING.
2. Use the PART SELECT
∧
and
∨
buttons to
select the part.
3. Use the buttons below the display to adjust
each attribute (explained in detail following).
• The settings display is comprised of 5 pages. Use the
PAGE buttons to switch pages.
4. When you have completed adjusting all of the
settings for one part, select another part and
repeat the adjustment procedure as desired.
• The settings and effects of the PAN, EFFECT etc. may
differ depending on the sound.
<PAGE 1>
SOUND:
Use the SOUND
∧
and
∨
buttons to select a
sound.
• The buttons on the control panel may also be used to
select a sound.
VOLUME:
Use the VOL
∧
and
∨
buttons to adjust the vol-
ume (0 to 127).
PAN:
Use the PAN
∧
and
∨
buttons to adjust the ste-
reo balance (L64–CENTER(CTR)–R63).
• At L64, the sound is completely to the left, at R63 com-
pletely to the right. At CENTER, the sound is at the cen-
ter. The display indicates the selected position.
• Even at the same numerical value, the stereo balance
may differ slightly depending on the sound.
SUS PEDAL:
Use the SUSTAIN
∧
and
∨
buttons to adjust the
length of the sustain (1-8). Use the ON/OFF but-
tons to enable or disable the sustain effect, when
the sustain pedal is depressed.
KEY SHIFT:
Use the KEY
∧
and
∨
buttons to specify the
amount of key shift ( −24 to +24).
• A value of 1 means a shift of one semi-tone. To raise (or
lower) the pitch one octave, set the value to +12 (or −12).
• The
∨
button is used to lower the pitch, and the
∧
button
to raise the pitch.
TUNING:
Use the TUNE
∧
and
∨
buttons to adjust the fine
tuning ( −128 to +127).
• The
∨
button is used to lower the pitch, and the
∧
button
to raise the pitch.
<PAGE 2>
REVERB DEPTH:
Use the REVERB
∧
and
∨
buttons to adjust the
depth of the REVERB (0 to 127).
DIGITAL EFFECT:
Use the DIG. EFFECT ON/OFF buttons to set
the DIGITAL EFFECT to on or off.
CHORUS:
Use the CHORUS ON/OFF button to set the
CHORUS to on or off. Use the
∧
and
∨
buttons
to adjust the depth of the effect (0 to 127).
MULTI:
Use the MULTI ON/OFF button to set the MULTI
EFFECT to on or off. Use the
∧
and
∨
buttons to
adjust the depth of the effect (0 to 127).
<PAGE 3>
11_Part VI.fm 102 ページ ２００３年５月１９日 月曜日 午後１時４４分