Technics SX-PR54/M - Manual (Page 98)

Part V Disk Drive
98
QQTG0701
Dis
k
Driv
e
<SAVE OPTION>
Specify the kind of data you wish to save to the
disk. To maximize effective use of disk memory
or to minimize the save time, select only the type
of data you wish to save.
1. Use the PAGE buttons to access the 2/3
SAVE OPTION display.
• The display looks similar to the following.
2. Use the buttons below the display to specify
the types of data you wish to save (YES/NO).
• For PANEL MEMORY, select from NO/1 BANK/ALL.
Selecting 1 BANK will save only bank A.
• Press the PERFORM button to select all the performance
data, or press the BACKUP button to select all the back
up data at once.
• If the ALL OFF button is pressed, all the settings change
to NO.
3. Press the SAVE button.
• The SAVE operation begins.
<SEQUENCER SONG SAVE>
You can specify a single song in the
SEQUENCER to save to the disk.
1. Use the PAGE buttons to access the 3/3
SEQUENCER SONG SAVE display.
• The display looks similar to the following.
2. Use the buttons below the display to select the
song number you wish to save.
3. Press the SAVE button.
• The SAVE operation begins.
ⅢⅢⅢⅢ
SMF FORMAT 0
This instrument’s SEQUENCER data can be
saved in the “Standard MIDI File” format (FOR-
MAT 0) for use on other instruments.
• What you can save in the SMF format (FORMAT 0) is
ordinary performance data, such as note data. Data such
as chord and rhythm data, COMPOSER data, etc. is not
saved. If you wish to also save this special Technics
data, save the data in the Technics File format.
• If you use the APC TO SMF CONVERT function of the
SEQUENCER, you can convert the patterns of the auto-
matic accompaniment, etc. to SMF data. (Refer to page
78.)
1. To overwrite a file, use the ▲ and ▼ buttons
and then select a song name.
• If the number of files is 10 or more, you can use the
PREV and NEXT buttons to go back or advance 10 files
at a time.
2. If you wish to assign a name to the file, press
the NAME button.
3. Use the buttons below the display to assign a
name.
4. Press the OK button.
• The display returns to the SAVE display.
5. Use the FROM SONG buttons to select the
SEQUENCER song number you wish to save.
• The song name to save from is shown below the FROM
SONG button.
6. Use the PANEL HEADER buttons to specify
ON or OFF.
ON:
The sound and volume settings for each
part are saved as data at the beginning of
the file.
OFF:
This data is not saved.
7. Use the 1 MEASURE SPACE buttons to
select ON or OFF.
ON:
A one-measure space is added to the
beginning of the file.
OFF:
No space is added.
• When there is various data other than performance data
stored at the beginning of a file, the start of playback may
be delayed. This can be avoided by set the 1 MEASURE
SPACE to ON to inserting a before the beginning of the
performance.
10_Part V.fm 98 ページ ２００３年５月１６日 金曜日 午後８時４１分