Technics SX-PR54/M - Manual (Page 72)

Part III Sequencer
72
QQTG0701
Se
qu
en
cer
Song Clear
Erase the recorded contents of all tracks.
1. On tne SEQ MENU display, select RECORD
& EDIT.
2. On the RECORD & EDIT display, selct SONG
CLEAR.
• The display looks similar to the following.
3. Use the SONG No./ALL
∧
and
∨
buttons to
specify the number of the song to erase.
• The data size (KB) and the total amount of SEQUENCER
memory or current song memory used is shown as a per-
centage (%) to the right of the song name.
• If ALL is selected, all the songs recorded in the
SEQUENCER will be erased.
4. Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
• If the YES button is pressed, “COMPLETED!” appears on
the display, the specified songs are erased.
Track Clear
Erase the contents of a specific track.
1. On the SEQ MENU display, select RECORD
& EDIT.
2. On the RECORD & EDIT display, select
TRACK CLEAR.
• The display looks similar to the following.
3. Use the balance buttons to select the track or
tracks you wish to clear.
• A “CLR” mark is shown for the selected tracks.
4. Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
• If the YES button is pressed, the specified tracks are
erased.
08_Part III.fm 72 ページ ２００３年５月１６日 金曜日 午後５時４１分