Technics SX-PR54/M - Manual (Page 97)

Part V Disk Drive
97
QQTG0701
Dis
k
Driv
e
Saving data
The recorded data and panel settings of this instrument can be saved on a disk.
Disks
You can use 3.5 inch 2DD (720KB) or 2HD
(1.44MB) disks.
• How to distinguish the two disk types:
• Although 2HD disks can hold more data and are conve-
nient for quick loading and saving, some models may be
able to read only 2DD disks. Therefore, you may not be
able to use your 2HD disk data with other musical instru-
ment models.
• When saving data to the disk, the write-protect tab must
be closed.
SAVE
1. Insert a formatted disk into the Disk Drive slot.
Push it all the way in until you hear a click.
• A disk which is used with this instrument for the first time
must first be formatted.
2. On the DISK MENU display, select SAVE.
• The display looks similar to the following.
3. Select the type of data save you want.
TECHNICS FORMAT:
Save this instrument’s data in the Technics
File format.
SMF FORMAT 0:
Save the SEQUENCER data in the “Stan-
dard MIDI File” format (FORMAT 0).
ⅢⅢⅢⅢ
TECHNICS FORMAT
1. Use the buttons below the display to specify
the file number you wish to save to.
• The types of data that can be saved are shown in a frame
on the right side of the display. If you press the SAVE
button, all the indicated data is saved. Ordinarily PER-
FORMANCE data is selected, but you can use the SAVE
OPTION to select specific data to save.
2. If you wish to assign a name to the file, press
the NAME button.
• The display looks similar to the following.
3. Use the buttons below the display to assign a
name.
• Set the character input position with the POSITION but-
tons, select the characters with the alphanumeric buttons
and repeat name assignment.
• Press the INS button to enter a space at the cursor posi-
tion.
• Press the DEL button to erase the character at the cursor
position.
• Press the CLR button to erase the entire name.
• Press the
→← button to center the name.
4. Press the OK button.
• The display returns to the SAVE display.
5. Press the SAVE button.
• The SAVE operation begins.
• If you attempt to save data to a file number in which data
is currently saved, the display changes to the confirma-
tion display. Press the YES button to continue the SAVE
procedure, or press the NO button if you wish to cancel it.
2DD 2HD
Hole No hole
Storage is not
possible Storage is
possible
Open Closed
10_Part V.fm 97 ページ ２００３年５月１６日 金曜日 午後８時４１分