Technics SX-PR54/M - Manual (Page 110)

Part VIII Sound Edit
110
QQTG0701
So
un
d E
d
it
Easy Edit
The most commonly used edit functions are consolidated on one display, providing convenient and quick
editing operation.
1. On the SOUND EDIT menu display, select
EASY EDIT.
• The display changes to the following.
2. Use the buttons below the display to specify
the value of the attribute.
• An effect may remain unchanged when EASY EDIT is
used to set the value.
3. Press the WRITE button to store your new
sound.
• Storing your new sound is explained on page 119.
• If a sound is stored in the EASY EDIT mode, and is later
selected in the EASY EDIT mode, the displayed value of
an attribute may be different from the value when it was
stored. The sound itself, however, is exactly as it was
stored.
Tone Edit
Modify the separate tones which comprise the sound.
About tones
A sound may be made up of at most four tones.
BRILLIANCE:
Adjust the brightness of the sound.
VIBRATO DEPTH:
Set vibrato depth.
VIBRATO SPEED:
Set vibrato speed.
VIBRATO DELAY:
Set time delay between key played and
vibrato start.
OCT SHIFT:
Shift the octave range.
ATTACK:
Adjust attack time.
RELEASE:
Adjust time of sound fade-out after key is
released.
Easy Edit items
SOUND
1st tone
2nd tone
3rd tone
4th tone
13_Part VIII.fm 110 ページ ２００３年５月２０日 火曜日 午前８時２１分