Measure edit, Select the function you wish to edit, Measure copy – Technics SX-PR54/M User Manual
Page 87: Measure erase, Part iv composer
Part IV
Composer
87
QQTG0701
C
o
m
p
o
ser
Measure Edit
You can edit the recorded data one measure at a time.
Select the function you wish to edit.
1.
During recording, press the MEASURE EDIT
button.
• The display looks similar to the following.
2.
Select the function.
3.
Follow the procedure to edit the function (see
below).
• Only the contents of the same pattern can be edited.
MEASURE COPY
Copy recorded data of specified measures to a
specified point.
• On the destination track, the new data replaces the cur-
rent measure contents.
1.
Specify the measures you wish to copy from
the source track (FROM).
• On the FROM side, specify the settings with the corre-
sponding buttons.
PART:
Select the part to copy from. (If ALL is
selected, all parts are copied.)
FIRST MEASURE:
Specify the first measure to copy.
LAST MEASURE:
Specify the last measure to copy.
2.
Specify where you wish to copy the selected
measures to.
• On the TO side, specify the settings with the correspond-
ing buttons.
PART:
Select the part to copy to.
START MEASURE:
Specify the start point to copy the selected
measures to.
3.
Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
• If the FROM and TO parts are the same and the FROM
and TO measures overlap, copy is not possible.
MEASURE ERASE
Erase the recorded contents of specific mea-
sures.
• Note that only the contents of the measures are erased,
not the measures themselves; the length of the perfor-
mance remains the same.
1.
Use the PART
∧
and
∨
buttons to specify the
part.
• If ALL is selected, data is erased from the specified mea-
sures of all the parts at one time.
2.
Use the FIRST MEASURE
∧
and
∨
buttons to
specify the start point (measure number).
3.
Use the LAST MEASURE
∧
and
∨
buttons to
specify the end point (measure number).
4.
Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
09_Part IV.fm 87 ページ ２００３年５月２０日 火曜日 午後５時２５分