Technics SX-PR54/M - Manual (Page 61)

Part III Sequencer
61
QQTG0701
Se
qu
en
cer
Sequencer Play
Play back your recorded performance.
1. Press the SEQUENCER PLAY button to turn
it on.
• The display looks similar to the following.
2. After pressing the SONG button, use the
SONG
∧
and
∨
buttons to select a song num-
ber for playback.
3. Use the balance buttons below the display to
show “PLAY” above the track numbers you
wish to have played back.
• Highlighted track numbers indicate tracks that are
already recorded. Only highlighted track numbers can be
selected for playback.
• You can select two or more tracks to play back at one
time.
4. Press the SEQUENCER RESET (FILL IN 1)
button.
• The SEQUENCER returns to the beginning of the song
and the beginning panel settings are recalled.
5. If you want to playback a song starting from a
point other than the first measure, use the
MEAS
∧
and
∨
buttons to specify the measure
number.
• “MEASURE=” indicates the current measure number.
6. Press the START/STOP button.
• The recorded performance is played back from the speci-
fied measure.
• When playback is begun from a measure in which an
INTRO, COUNT INTRO, FILL IN or ENDING is recorded,
the corresponding function does not work.
• You can press the MIXER button and modify the settings
for each part.
• For information about LYRICS, refer to page 91.
7. To stop playback, press the START/STOP
button.
• If the START/STOP button is pressed again, playback
will continue from the point it was interrupted.
8. When you are finished playing back your per-
formance, press the SEQUENCER PLAY but-
ton to turn it off.
CHORD STEP REC
SEQUENCER
PLAY
EASY
REC
If a rhythm progression has been recorded in
the RHYTHM (RHY) part, the MEASURE dis-
play used in the STEP RECORD and EDIT
displays conforms to the time signature data
stored in the RHYTHM part.
Adjusting the playback tempo
Even with a song having recorded tempo data, you can use TEMPO/PROGRAM or TAP TEMPO to
adjust the tempo to your liking.
• When the tempo is changed, all the tempo data of that song is automatically changed by the same ratio. Accordingly, even in
song data in which tempo change data is stored, a single adjustment of the tempo produces a natural-sounding playback.
• To return to the original tempo, while the song is stopped press the SEQUENCER RESET button. Note that the tempo
change is also canceled when you switch to another song or load a new song.
• The adjusted tempo is canceled when you begin the recording procedure and the original tempo data will be recorded.
08_Part III.fm 61 ページ ２００３年５月１６日 金曜日 午後５時４１分