Technics SX-PR54/M - Manual (Page 55)

Part III Sequencer
55
QQTG0701
Se
qu
en
cer
SEQUENCER menu
The configuration of the SEQUENCER setting
display is as follows.
1. Press the PROGRAM MENUS button to turn it
on.
• The display looks similar to the following.
2. Select SEQUENCER.
• The display looks similar to the following.
• The SONG
∧
and
∨
buttons are used to select a song.
• You can press the NAMING button and assign a name to
the song. (Refer to page 63.)
• You can press the PANEL WRITE button to store the cur-
rent settings of the instrument at the beginning of the
song. (Refer to page 63.)
3. Select RECORD & EDIT, COPY & PASTE or
RANGE EDIT, and follow the corresponding
procedure.
<RECORD & EDIT>
<COPY & PASTE>
<RANGE EDIT>
PROGRAM
MENUS
08_Part III.fm 55 ページ ２００３年５月１６日 金曜日 午後５時４１分