Quantize, Part iii sequencer – Technics SX-PR54/M User Manual

Page 71

Advertising
background image

Part III

Sequencer

71

QQTG0701

Se

qu

en

cer

Quantize

The QUANTIZE function can correct the timing of your performance after it has been recorded. If the
rhythm is slightly out of sync or inexact, it will automatically be corrected to the specified quantize level.

1.

On the SEQ MENU display, select RECORD
& EDIT.

2.

On the RECORD & EDIT display, select
QUANTIZE.

• The display looks similar to the following.

3.

Use the TRACK

and

buttons to specify

the track number.

• You cannot select the track for the CONTROL, RHYTHM

or CHORD part.

• If ALL is selected, all the tracks are quantized.

4.

Use the FIRST MEAS

and

buttons to

specify the start point (measure number).

5.

Use the LAST MEAS

and

buttons to spec-

ify the end point (measure number).

6.

Use the VALUE

and

buttons to specify the

quantize level.

• Select from

q

,

e

,

e3

,

x

,

x3

,

r

,

r3

. (A 3 denotes a triplet-

type note.)

7.

Use the STRENGTH

and

buttons to select

the amount of quantize (%).

• 100% is a convenient setting. When set to 100%, the per-

formance data is quantized exactly to the level specified
for the VALUE (“just”). For example, at 50%, the data is
quantized to a point that is half that of the just level. By
this setting, you can attain an effect that is very slightly
off-beat from the rhythm.

8.

Use the WINDOW

and

buttons to specify

the range (%) affected by the quantize setting.

• With the increment set to 100 for the VALUE, at a + set-

ting, data close to the just point is corrected, and at a –
setting, data far from the just point is corrected. For
example, if set to –30% the quantize function affects data
far from the just point, and if set to +30% the quantize
function affects data close to the just point. +100% is usu-
ally a convenient setting.

• The +100% setting and the –100% setting are the same.

Example: When VALUE is set to

q

9.

Press the OK button.

• The confirmation display appears. Press the YES button

to execute the function, or press the NO button to cancel
the function.

Rhythm as written
in the score

Timing of actual
performance

Quantized
performance

e

100%

50%

just

50%

100%

+100%

+50%
+30%
–50%
–30%

–100%

08_Part III.fm 71 ページ 2003年5月16日 金曜日 午後5時41分

Advertising