Technics SX-PR54/M - Manual (Page 107)

Part VI Sound
107
QQTG0701
Sou
n
d
Sound Load Option
The data for each individual sound is set with the most suitable effect settings, etc., but in some cases
when switching from one sound to another and these settings are recalled, the setup is not the way you
want it. By using the SOUND LOAD OPTION, you can adjust the settings so that specific data is not
recalled.
1. On the SOUND MENU display, select SOUND
LOAD OPTION.
• The display looks similar to the following.
2. Use the ▲ and ▼ buttons to select an item.
Use the
∧
and
∨
button to set the filter to ON
or OFF.
APC Reverb Setting
Although an appropriate REVERB is applied for the automatic accompaniment parts depending on the
rhythms by default, you can adjust the REVERB level for each part.
1. On the SOUND MENU display, select APC
REVERB SETTING.
• The display looks similar to the following.
2. Use the PART ▲ and ▼ buttons to select the
part, the DEPTH
∧
and
∨
buttons to set the
value (PRESET IN RHYTHM, 0 – 127).
• PRESET IN RHYTHM is an optimal preset value for each
rhythm for use with the APC Reverb Setting.
11_Part VI.fm 107 ページ ２００３年５月１９日 月曜日 午後１時４４分