Technics SX-PR54/M - Manual (Page 83)

Part IV Composer
83
QQTG0701
C
o
m
p
o
ser
KEY SETTING
Set the key and chord in which you wish the
recorded pattern to be played. If the recorded
performance is played in a key or chord different
from this setting, the automatic accompaniment
will not be able to distinguish the correct chord.
1. On the RECORDING display press the KEY
SETTING button.
• The display looks similar to the following.
2. Use the KEY
∧
and
∨
buttons to set the key.
Use the CHORD
∧
and
∨
buttons to set the
chord type (Maj/Min).
3. When you have finished making the settings,
press the EXIT button.
Recording procedure
1. In the START RECORDING area on the dis-
play, select the rhythm part you want to record
first.
BAS: BASS
AC1–5: ACCOMP 1–5
DR1, 2: DRUMS 1, 2
• The metronome sound starts and the display looks simi-
lar to the following.
2. Adjust the tempo.
• The tempo is shown on the display as
q
=.
• The tempo can be freely adjusted when you play back
the rhythm pattern, so record at the tempo which is easi-
est for you to play.
3. Select the sound.
• For the DRUMS part, only sounds from the DRUM KITS
sound group can be selected.
• For the ACCOMP and BASS parts, select sounds from
groups other than the DIGITAL DRAWBAR sound
groups.
• The sounds marked with # represent special guitar per-
formances and changing them to other sounds may
result in an unnatural, awkward sound expression.
4. Record the part.
• The specified number of measures are repeatedly played
back, during which time any newly played notes are
added to those already recorded. The current measure
number is shown on the display as “MEASURE=”.
• Record the performance in C major for correct chord pro-
gressions during playback. Follow the KEY SETTING
procedure if you wish to record the performance in a dif-
ferent scale.
• The sustain pedal operation or PITCH BEND and MODU-
LATION effects when MIDI data is received are also
recorded (except for the DRUMS part).
ⅢⅢⅢⅢ
Button functions
PART BALANCE:
Adjust the volume of each part on the PART
BALANCE display. (These settings are not
recorded.)
PART SETTING:
You can make detailed settings for each part.
(Refer to page 84.)
STEP RECORD:
Change to the STEP RECORD mode. (Refer
to page 86.)
SOLO:
Mute all parts except the part which is cur-
rently being recorded.
• A MUTE mark is shown for the other parts on the display.
• To turn off the SOLO function, press this button again.
PART CLR:
Erase all recorded contents of the currently
selected part.
NOTE CLR:
Data is erased one note or one percussion
instrument (DRUMS part) sound at a time.
• Hold and press this button, and press the keyboard key
that corresponds to the note or percussion instrument
(DRUMS part) sound you wish to erase.
ALL ERAS:
The performance recorded in the selected part
is erased for as long as this button is pressed.
(Continued on the next page)
09_Part IV.fm 83 ページ ２００３年５月２０日 火曜日 午後５時２５分